OP_COM DIAGNOSIS OPEL PIC ORIGINAL SOFTWARE 2021

Description

OP-COMSPECIAL DIAGNOSIS OPEL 200603A WITH THE NEW CHIP PIC18F458 </strong> Microcontroller.

SOFTWARE 2021 (ENGLISH ONLY).

OP-COM PROFESSIONAL DIAGNOSTIC TOOL FOR OPEL OP-COM AUTO SCANNER.

WORK ON WINDOWS XP, WINDOWS 7 32 BIT/64 BIT, WINDOWS 10.

1. IT COVERS ALMOST ALL OPEL CARS, EVEN NEW CARS WITH CAN-BUS BASED DIAGNOSIS, SUCH AS VECTRA-C, ASTRA-H, ZAFIRAB.

2. THE PROGRAM ALLOWS YOU TO READ AND ERASE ERROR CODES, SHOWS DATA IN REAL TIME.

3. THE PROGRAM SUPPORTS MANY CONTROL UNITS, SUCH AS ENGINE, AUTOMATIC TRANSMISSION, ABS, AIRBAG, ENGINE COOLING MODULE, INSTRUMENT CLUSTER, ELECTRONIC CLIMATE CONTROL, BODY CONTROL UNIT.

4. SINCE OPEL USES MANY PINS IN THE OBD CONNECTOR, THE DIAGNOSTIC INTERFACE WORKS AS A MULTIPLEXER AND SELECTS THE APPROPRIATE PIN FOR COMMUNICATION.

PIN3, PIN7, PIN8, PIN12 = SERIAL CONNECTION (ISO9141, KW81, KW82, KWP2000).

5. THE ERROR CODES ARE DISPLAYED WITH ALL THE AVAILABLE INFORMATION:

FULL TEXT DESCRIPTION OF THE ERROR CODE, FULL STATUS INFORMATION (PRESENT, NOT PRESENT, INTERMITTENT)

6. YOU CAN PRINT, SAVE OR COPY THE ERROR CODES TO ANY OTHER APPLICATION. FROM THE ERROR CODE WINDOW, YOU CAN DIRECTLY ACCESS THE MEASUREMENT BLOCKS WINDOW.

7. THE PROGRAM SHOWS MEASUREMENT BLOCK INFORMATION ON MANY CONTROL MODULES, YOU CAN CHOOSE ANYTHING FROM THE LIST BY YOURSELF.

8. THE PROGRAM IS ABLE TO SHOW 8 PARAMETERS OF THE MEASUREMENT BLOCK SIMULTANEOUSLY. THE SAMPLING FREQUENCY DEPENDS MAINLY ON THE COMMUNICATION PROTOCOL. FOR EXAMPLE, OLDER SYSTEM, SUCH AS OMEGA-B CAN-BASED CONTROL UNITS ARE VERY FAST!
IT IS ALSO POSSIBLE TO RUN OUTPUT TESTS ON MANY CONTROLLERS.
PIN6 – PIN14 – PIN3 – PIN11 – PIN1
HSCAN – HIGH SPEED DUAL-CABLE CAN-BUS, 500 KBPS
MSCAN – TWO WIRE CAN-BUS, MEDIUM SPEED, 95 KBPS
SWCAN – SINGLE WIRE CAN-BUS, LOW SPEED, 33,3 KBPS

9. YOU WILL RECEIVE FEEDBACK ON THE STATUS OF THE ACTIVATED OUTPUT. WITH OP-COM, YOU CAN LEARN THE KEYS ON THE IMMOBILIZER AND THE REMOTE KEYS TO THE CENTER DOOR LOCK.

10. IT IS ALSO POSSIBLE TO RESET AND PROGRAM THE FOLLOWING OBJECTS RELATED TO THE IMMOBILIZER: ECM, BCM, IPC.

YOU WILL NEED YOUR VEHICLE SECURITY CODE, WHICH CAN BE FOUND ON YOUR CAR-PASS.
IT IS ALSO POSSIBLE TO RESET AND PROGRAM THE “SERVICE INTERVAL” REMINDER ON ASTRA-G, ZAFIRA, CORSA-C, MERIVA
IT IS POSSIBLE TO CODE THE SAB6E SAB8 AIRBAG WITH THE SOFTWARE.
(NOT ALL CAR MODELS CAN SUPPORT THESE FUNCTIONS).

AFTER PURCHASE, THE ENTIRE COMPATIBLE SOFTWARE PACKAGE FOR THIS DIAGNOSIS TOOL WILL BE SHIPPED "VIA LINK".